Rotating Trolling Motor Mount
THIS IS A NEW PRODUCT WITH LIMITED AVAILABILITY DUE TO DEMAND, PLEASE ALLOW APPROXIMATELY 1-2 WEEKS FOR YOUR ORDER TO SHIP.
This Patent Pending mount is CNC Machined from 1.0? thick 6061-T6 aluminium. Additionally, it is Type III Hard Coat Anodized per MIL-A-8625 and comes with a lifetime warranty*. This model rotates fully with 4 locking positions at 0, 30, 60 and 90 degrees. Fully compatible with your Minn Kota, Garmin, Rhodan, Power-Pole, Motorguide or any other trolling motor with up to 108 inch shaft length. If you want to use your standard quick release mount such as RTA-17, MKA-21, RTA-54, RTA-62, MKA-64, RTA-55, MKA-56, or Garmin versions, we have those hole patterns included already so you are all set! Quest series motors require QST-1 expander plate so please add that to your cart when ordering for those motors. With a built in, simple to use detent mechanism, simply pull the large pin and rotate the motor so the shaft clears the rub rail. Easy! The SS-7.5R is the most robust rotating mounting system available today.
- You have limited space to mount a trolling motor (clear deck space required for a 7.625? diameter circle)
- You want the trolling motor to sit off to the side and sit along the gunwale
- You want a clear view of the bow without the trolling motor obstructing your field of view
- ALL SS-7.5R mounts require 6 holes in your deck for proper attachment with first bolt within approximately 14 inches from edge of rub rail
- Uses all 3/8? 316 Stainless hardware
Product overview
- Designed to be used with the following mount systems or trolling motors with shaft lengths up to 108 inches
- Minn Kota (Quest series included**): Instinct, Ulterra, Terrova, Powerdrive, Riptide Ulterra, Riptide Terrova, Riptide Powerdrive, Riptide SP/ST, PD/HC Pontoon and DH40
- Garmin Force Kraken
- Rhodan (all models)
- Power-Pole Move PV
- MotorGuide: Xi5 and Xi3
- RTA-17, MKA-21, RTA-54, RTA-62, MKA-64, RTA-55**, MKA-56** Quick Release mounts
- JM55007 (RTA-17 / MKA-21 clone) Quick Release mounts
- Many other brands that share the same bolt patterns as above
- Deck Plate footprint: 7.625? Diameter
- Center of rotation: Approximately 3.5 inches behind rear of motor
- Center of rotation to edge of trolling motor shaft: Approximately 17.25 to 18.25 inches
- Rotation Pin: 4.5? Diameter
- Detent Pin: 3/8? Diameter (316SS)
- Travel: 360 degrees, 4 detents at 0, 30, 60 and 90
- Trolling motor mounted height: ~1.50 inches from mounting surface (Boat deck typically)
- Bottom of rotating plate to deck: Approximately 0.675 inches
- Rated motor weight (NOT thrust): 120 lbs
- Rated shaft length: UP TO 108 inches
- Installation Instructions (Preliminary!)
- Warranty: Lifetime*
*Please see Warranty page for complete details of coverage
** Requires additional QST-1 adapter
https://shuttleslide.com/wp-content/uploads/2024/07/VIDEO_ShuttleSlide_rotatingmount.mp4?_=2
